Hanna Instruments High Range Nitrate Checker HI782

Nitrate is the ultimate step within the Nitrogen cycle. Extreme quantities of nitrates in saltwater aquariums facilitate the expansion of undesirable organisms resembling algae and dinoflagellates. The HI782 is an easy, correct, and cost-effective solution to measure nitrate from 0.0 to 75.0 ppm (as NO3–) in your saltwater aquarium.

The HI782 Nitrate Checker HC makes use of the Zinc Discount technique to measure the focus of nitrate colorimetrically. The HI782 gives fast, correct leads to 4 straightforward steps:

1. “Zero” the Checker HC as required within the particular process
2. Add reagent to your water pattern
3. Place the vial into your Checker HC
4. Press the button and browse the outcomes

Options:

• To be used with salt water samples.
• Extra correct than chemical checks kits.
• Devoted to a single parameter.
• Small measurement, large comfort.
• No errors with a digital readout.
• Perfect for aquariums and marine biology purposes.

Specs:

• Vary: 0.0 to 75.0 ppm (as NO3-)
• Decision: 0.1 ppm
• Accuracy at 25 levels C: ±2.0 ppm ±5% of studying at 25 levels C (77 levels F)
• Mild Souce: LED at 525 nm
• Mild Detector: silicon photocell
• Methodology: Zinc discount technique. The response between nitrate and the reagent causes a pink tint within the pattern. This checker has been developed to work with seawater samples.
• Battery Kind: (1) 1.5V AAA
• Auto-off: after ten minutes of non-use
• Setting: 0 to 50 levels C (32 to 122 levels F); RH max 95% non-condensing
• Dimensions: 86.0 x 61.0 x 37.5 mm (3.4 x 2.4 x 1.5″)
• Weight: 64 g (2.3 oz)

Measurements with a spread as much as 75.0ppm
Much less complicated laboratory grade accuracy – Requires just one reagent
Easy, intuitive digital operation
Compact and exact whether or not at residence, at work, or on-the-go